In this video we will show you how to apply the panels for the Soundproof(er) Sound booth 3 x 3 (SPB 33).
The complete set of panels consists of:
Absorption Panels
2 absorption panels
Sound Blocking Panels
1 door panel
3 wall panels
1 roof panel
4 vertical seal strips
4 top seal strips
4 corner seal strips
Accessories
1 light and adapter
Start by hanging the absorption panels. Hang them in a fashion that will leave a space open for you to enter/exit through the sound blocking door panel.
After you have finished hanging the absorption panels, apply the sound blocking door panel. All sound bloicking panels are equipped with special hanging brackets for easy installation.
The sound blocking door panel is equipped with side vlecro tie-ups that need to be secured to the frame. this is to keep the panels in place.
After hanging the sound blocking door panel, hang the wall panels. All wall panels are equipped with hanging brackets and will be installed the same way as the door panel.
After the walls are in place, put the roof top sound blocking panel on the frame, and straighten it. The roof panel also has tie-ups to secure it to the frame.
Next, secure the sound blocking panels together with the vertical seal strips. Make sure to push the edges of the adjacent panel together as tight as you can.
Do the same with the top seal strips.
The final part of the assembly is to seal the top corners. Tighten the corners and apply the corner seal strip. Corner seal strips are designed in a way that they can fold over themselves to form a corner.